Release history - OnPoint PCR
The following topics detail the features and enhancements in previous releases of OnPoint PCR.
What's new - OnPoint PCR 04-2019
Here is a listing of what's new for the April 2019 release of OnPoint PCR.
New financial statements and report interface
We’ve enabled a redesigned user interface for the financial statements and report document. The new design focuses on improving performance, usability, and efficiency. Highlights of the new design include:
New styling of review tools.
New toolbar design for buttons.
Enhanced editing experience, including editing text areas in-line within the financial statements.
The redesigned user interface features a navigation pane arranged by primary financial statement and report area (e.g., Cover Page, Table of Contents, Report, Balance Sheet, etc.) that allows you to quickly and easily navigate directly to a specific part of the financial statements and report. Please note, the titles of the financial statement areas in the navigation pane use generic terms; the titles of the financial statements and the report in the printed document reflects the proper titles of the financial statements and report based on your engagement selections (e.g., Accountant’s Compilation Report, Statements of Assets and Liabilities Arising from Cash Transactions, etc.).
As part of enabling the redesigned user interface, we’ve moved the guidance previously embedded in the Financial Statements and Report document (3-150) to other documents where earlier decision points affect the output of the financial statements and report.
Placeholders have been added to each folder within the Permanent File section of the Documents page and are autofilled upon completion of the PBC Document Requests form.
When beginning new engagements, the Permanent File section of the Documents page is now hidden until relevant.
Presentation and disclosure checklist
The checklist has been expanded to include additional presentation and disclosure requirements and guidance from recently issued, or soon to be effective, FASB Accounting Standards Updates (ASUs), including those that permit early adoption. See the Guidance section of the Presentation and Disclosure Checklist Optimizer for additional information about the ASUs included in the checklist.
The PBC Document Requests form (2-920) has been enhanced through the addition of individual queries to streamline requesting documentation from clients.
For each query added, we’ve provided a placeholder link to a corresponding folder in the Permanent File section of the Documents page that is automatically filled with the requested documents upon the completion of the query form.
The PBC Requests - Review Inquiries form (2-106) has been relocated to the Fieldwork section of the Documents page to better reflect engagement workflow.
The Tax Export function has been improved to provide a better user experience and to allow for the export of tax forms by simply selecting the Export button.
To avoid confusion when creating a consolidation engagement, we’ve added a column showing the file name in the Consolidation Hierarchy search. You can now easily view and select the consolidation file.
Decimals are now supported in financial statements*.
You can now add input rows from the table directly without having to go to edit mode*.
*Only available if enabled in your product.
We’ve introduced the Use Default button in the firm author template management section which resets the firm template to the default product template.
What's new - OnPoint PCR 02-2019
Here is a listing of what's new for the February 2019 release of OnPoint PCR.
OnPoint PCR now provides tax export functionality compatible with Intuit’s Lacerte© Tax.
Functionality is available for Corporations, S Corporations, and Partnerships and includes common tax forms related to each entity type.
Common ratios used in analytical procedures have been integrated into the Analysis tab of most fieldwork documents for review engagements.
Ratios are automatically calculated based on defined accounts and account groupings using amounts from the trial balance.
Presentation and Disclosure Checklist
Expanded to include additional presentation and disclosure requirements and guidance from recently issued, or soon to be effective, FASB Accounting Standards Updates (ASUs).
See the Guidance section of the Presentation and Disclosure Checklist Optimizer for additional information about standards included in the checklist.
Client inquiries included in the review engagement fieldwork documents have been updated to be consistent with the latest release of the AICPA Guide, Preparation, Compilation, and Review Engagements.
Many of the inquiries have been phrased as open-ended questions allowing for more thorough client responses.
- Adjustments now display the period and year in which the adjustment was made.
- Decimals are now supported in Analysis charts. The decimal settings in the ratio table are applied in the chart.
- To get a better feel of what your deliverables will look like, the application now uses the same font that’s configured for the deliverables in content authoring.
- All documents comprising the Presentation and Disclosure Checklist may now be printed as a group, rather than as single documents.
- There is now a badge counter on the Carry Forward icon. The badge counter shows the number of items that can be carried forward.
Column headers now repeat on subsequent pages when you manually insert page breaks in the dynamic table.
Dynamic content is available in column headers. You can now include dynamic text and formulas in column headers.
The way symbols are displayed has been improved and column headers have been added. Symbols now appear on a separate line under the header text.
You can now undo and redo actions when editing a dynamic table.
Formulas and engagement glossary terms
You can now view the condition that generated the output text.
Additional address fields are available in formulas for more flexibility. You can now arrange the address information to comply with your regional format specifications.
Letters, memos and financial statements
Letters and financial statements now include an indicator of the number of unset placeholders in the document.
Document sign-off now validates placeholder fields and text. If there are unset placeholders in the document, you get a warning message before you can proceed with the sign-off.
You can now insert formulas in the query text.
You can now see the due date of the query in the engagement.
The term Procedure has been replaced with the term Query.
The name of the responder and the timestamp of the response are now displayed for all response types.
Sorting is now available in the Query Dashboard. You can sort queries in ascending or descending order based on status, due date, progress and name.
You now get a confirmation message once you send a query.
There is now a centralized view of the engagement queries. At the Query Dashboard, you can view a list of all the visible queries on the engagement. The list shows brief information about each query.
What's new - OnPoint PCR 12-2018
Here is what's new for the December 2018 release of OnPoint PCR.
Revisions for professional standards
- Updated for SSARS 24, excluding AR-C 100, Special Considerations - International Reporting Issues (which will be included in a future release)
- OnPoint PCR (PCR) assumes early adoption of SSARS 24, which, except as indicated in item ii., is effective for compilations and reviews of financial statements for periods ending on or after June 15, 2019.
- The SSARS 24 revision to AR-C 90.39, which was effective upon issuance in May, 2018, was included in the previous version of PCR.
- Updated for recently issued, or soon to be effective, FASB Accounting Standards Updates, including the revenue recognition standards. See the guidance section of the disclosure checklist optimizer for further information about standards included in the disclosure checklist.
- Interim period engagements for monthly, quarterly and semi-annual reporting periods (including comparative periods) are now supported.
- Assumes the same type of engagement is being performed for each interim period during the year. (If a different type of engagement is performed at year end, a new engagement would need to be set up for that engagement.)
- An engagement letter is created in the first period file and will cover all interim engagements for the period. The reports and financial statements will be for the specific period. The signed engagement letter will roll forward during each period covered.
- The period end date now appears in the trial balance if interim reporting is being used.
- You can now define the period on CSV or Excel import.
- Carry forward allows you to carry forward the following between periods
- Procedure responses in checklists
- Adjustments to, creations of, and movements of procedures in checklists and entire documents
- Adjustments to the engagement letter and financial statements (including reports thereon)
- For annual engagements, the prior year adjusted trial balances will carry forward to the PY column in documents, including the financial statements.
- You can now see prior period modifications to text areas that are available to be carried forward. Changes made in the previous period are optionally given as a choice between accepting and denying for the current period.
- Financial information in dynamic tables is now automatically carried forward when the financial statement is opened after a carry forward.
- When you carry forward an engagement file, you can now view procedures that were added or modified by the firm author between versions.
- Values within the materiality form now carry forward from year-to-year for annual engagements.
Analytics in a review engagement
- Added a link to a new HTML document with common analytics performed for key areas.
- PCR now provides the ability to consolidate multiple 100% owned entities and includes
- An interactive consolidation hierarchy
- Multiple financial statement and trial balance layouts
- The same functionality and automation as stand-alone files (with the exception of interim periods)
- This version allows you to carry forward a consolidated annual engagement. (Carry forward of a consolidated interim engagement to be included in a future release.)
- You can now identify and modify dynamic text that is being used and see an explanation of the condition that is causing the term to show
- The interface for editing mode in dynamic tables has been updated. Now, when you are editing a dynamic table, you can
- Automatically save all changes through autosave
- Cancel any changes you have made to the table
- Save your changes and continue to work in editing mode, or
- Save your changes and close editing mode.
These four options replace the Done option that previously saved all changes and closed editing mode.
- Automatically save all changes through autosave
- A Done button has been added to the column settings area for dynamic tables. When editing a dynamic table, you can now use this button to collapse the column settings area once you have finished changing them.
- You can now create trial balance groups under unassignable parent groups.
- You can now display import source and company name in a trial balance after import.
- During an interim engagement, you can now view period end balances in the trial balance and other locations where balances are saved.
- The Tax Adjustments option will only be displayed on the trial balance settings if the tax adjustments feature is enabled for the product.
- Subsections of your materiality document will display based on whether the engagement is being performed on consolidated entities. This enables you to create materiality sections that are specific to consolidations, and those sections will only be displayed in consolidated engagements.
- You can now break down materiality between the parent and the subsidiaries in a consolidated file.
The Year Start date now appears in the Engagement Properties screen when the period is set to Annual.
You can now add issues, edit visibility, and change print settings on grouping areas you have created.
- The engagement glossary allows you to add complexity to the automatically-generated letters and report by appropriately tailoring based on your responses in the engagement criteria on the client acceptance and continuance form for things such as the reporting period (e.g. monthly, quarterly, semi-annually, annually), applicable supplementary schedules, and consolidation. The responses will be appropriately inserted throughout the client’s engagement letters, files, and report. As with all items in PCR, it is your responsibility to review documents for accuracy and exercise professional judgment in all areas.
- The engagement glossary allows you to see an explanation of the condition that is causing the term to be displayed.
- The query interface has been enhanced through the use of optimizers to further filter document and review inquiry requests to clients.
- In each query, the wording included in the instructions to clients is now conditional based upon the firm’s preferred pronoun
- Guidance no longer shows when it is blank.
- You can now see when, and by whom, a file was uploaded into an engagement.
- To avoid confusion, the term “procedure” in query documents has been replaced with the term “query.”
- The Allow sign offs checkbox has been removed from the Procedure Settings dialog.
- The status drop-downs in queries have been replaced with buttons that are dynamically shown based on the query’s current status
- Because queries are rarely sent to all contacts, the Assign to all contacts checkbox in the Open Query dialog is now deselected by default.
- You can now differentiate sections of a document included by default from sections added by your staff. Using the Added filter, you can now highlight all sections of a document created by a staff member.
- We have simplified the permanent file folder structure and the document request query to the client. The document request form has been simplified and an external link with suggestions on documents to request has been added to the guidance area.
- Based on feedback, "Login" has been changed to "Connect" in the Xero import dialog.
- Following a Trial Balance import, you can now see when Xero was the data source, and the name of the connected Xero organization.